Two-way control
Both handles can be governed by the selected access-control or remote-control logic.
ABLOY · EL SERIES · DIN
ABLOY EL561
A DIN-standard single-point lock for solid doors. Both inside and outside handles are electrically controlled, while opening by a compatible cylinder or thumbturn remains possible.
Door typeSolid doors
ControlBoth handles electrical
LockingSingle point
Updated: 2026-09-04 · Confirm all data against the complete order code
What the EL561 is designed to do
EL561 belongs to the ABLOY Europrofile electric-lock range. Its key distinction from EL560 is the operating logic: both handles are electrically controlled, making it suitable where access must be authorised in both directions.
Mechanical override
Opening by a compatible cylinder or thumbturn remains possible.
Configuration matters
Fail-safe or fail-secure behaviour must be confirmed from the complete order code.
Applications and selection boundaries
Confirm the door standard and operating logic before treating a similar model as a substitute.
Typical applications
- Commercial and public-building controlled doors
- Doors requiring authorised movement in both directions
- Solid wooden or metal doors
- Verified fire or escape-door configurations
Confirm or exclude
- Use EL560 where the inside handle must remain mechanically free
- Not suitable for door automation
- Do not order before checking door preparation and frame clearances
- Do not infer compliance from the model number alone
Product information checked for selection
Configuration-dependent values must be reconfirmed against the complete order code and current technical documentation.
Product typeElectromechanical handle-controlled lock
StandardDIN
Door typeSolid doors
Handle controlBoth inside and outside handles electrically controlled
LockingSingle point
HandingNon-handed; verify the actual opening direction
LatchDouble action
Deadbolt20 mm
Voltage12–24 VDC; verify current by complete order code
Mechanical openingCylinder or thumbturn opening available
Door automationNot suitable
Related models
Similar-looking models are not automatic substitutes; door preparation, drive type and handle logic may differ.
EL561
Single-point solid-door lock with both handles electrically controlled.
Current modelEL560
Single-point solid-door lock with electrical outside-handle control and mechanical egress.
View EL560 →EL566
Multipoint counterpart for solid-door applications requiring additional locking points.
View EL566 →Selection checklist
Provide door preparation, handing, traffic level, operating logic, power, interfaces, hardware, compliance requirements, quantity, destination and schedule.
Frequently asked questions
Common questions raised during preliminary selection and replacement discussions.
What door type is ABLOY EL561 intended for?
EL561 belongs to the ABLOY Europrofile electric-lock range. Its key distinction from EL560 is the operating logic: both handles are electrically controlled, making it suitable where access must be authorised in both directions.
How is ABLOY EL561 controlled?
Both handles can be governed by the selected access-control or remote-control logic.
What happens to EL561 during a power failure?
The fail state depends on the complete order configuration and control design. Confirm fail-safe or fail-secure operation before purchase.
Can EL561 be used with door automation?
No. ABLOY product information identifies EL561 as unsuitable for door automation.
Can EL561 be used on fire or escape doors?
Suitability must be verified against the complete lock, hardware, door certification and local compliance requirements.
What information is needed for a EL561 enquiry?
Provide door standard and preparation, handing, traffic, operating logic, power, interfaces, hardware, compliance needs, quantity, destination and schedule.
Use the complete order code, current technical documents and written project confirmation for final selection. This page does not replace engineering review or certification documents.
Discuss an ABLOY EL561 requirement
Send the door conditions, operating logic, quantity and project schedule for configuration review.