Controlled entry
The outside handle is released by the selected access-control logic.

A DIN/Europrofile single-point lock for profile doors. The outside handle is electrically controlled, the inside handle provides mechanical egress, and cylinder opening remains available.
Updated: 2026-09-04 · Confirm all data against the complete order code
EL460 is designed for profile and narrow-profile doors where installation space is limited. It combines access-controlled entry with mechanical egress for medium-traffic applications.
The outside handle is released by the selected access-control logic.
The inside handle remains mechanically operable.
Fail-safe or fail-secure behaviour depends on the complete order configuration.
Confirm the door standard and operating logic before treating a similar model as a substitute.
Configuration-dependent values must be reconfirmed against the complete order code and current technical documentation.
Similar-looking models are not automatic substitutes; door preparation, drive type and handle logic may differ.
Profile-door single-point lock with electrical outside-handle control and mechanical egress.
Current modelProfile-door model with both inside and outside handles electrically controlled.
View EL461 →A similar operating concept for solid doors rather than narrow profiles.
View EL560 →Provide door preparation, handing, traffic level, operating logic, power, interfaces, hardware, compliance requirements, quantity, destination and schedule.
Common questions raised during preliminary selection and replacement discussions.
EL460 is designed for profile and narrow-profile doors where installation space is limited. It combines access-controlled entry with mechanical egress for medium-traffic applications.
The outside handle is released by the selected access-control logic.
The fail state depends on the complete order configuration and control design. Confirm fail-safe or fail-secure operation before purchase.
No. ABLOY product information identifies EL460 as unsuitable for door automation.
Suitability must be verified against the complete lock, hardware, door certification and local compliance requirements.
Provide door standard and preparation, handing, traffic, operating logic, power, interfaces, hardware, compliance needs, quantity, destination and schedule.
Send the door conditions, operating logic, quantity and project schedule for configuration review.